Primers & Emulsions

Essential substrate preparation for long-lasting protection.

Overview

Our range of primers and emulsions are designed to optimize substrate adhesion and provide a secondary layer of protection. From solvent-based primers for bituminous membranes to water-based emulsions for damp-proofing, these products are the foundation of any successful waterproofing system.

Adhesion Bituminous Water-based

Key Features

Superior Adhesion

Penetrates substrate pores to create a high-strength bond with the waterproofing layer.

Corrosion Protection

Provides an initial barrier against moisture and chemicals on concrete and metal surfaces.

Fast Drying

Optimized formulas allow for rapid over-coating, reducing site downtime.

Applications

  • Substrate preparation for bituminous membranes
  • Damp-proofing for foundations and retaining walls
  • Protective coating for concrete pipes and structures
  • Primer for liquid-applied waterproofing systems

Compatible Systems

Membrane Roofing System

Substructure Protection

Civil Infrastructure Liner

Variants & Coverage

Product Family Coverage (m²/L) Solids Content (%) Primary Use
Awazel D-Primer 4 - 6 40 - 45% Solvent-based Bituminous
Awazel K-Emulsion 3 - 5 35 - 40% Water-based Damp-proofing
Awazel Metal-Prime 8 - 10 50 - 55% Anti-corrosive for Metal

Installation Guide

Priming is critical for the long-term bond of the waterproofing system. Substrate cleanliness and drying time are key.

  • Substrate must be structurally sound and free of loose particles.
  • Apply primer evenly using a brush, roller, or airless spray.
  • Allow to dry until tack-free before installing the membrane.
  • Ensure full coverage on porous substrates by applying a second coat if needed.

Download Primer Catalog

Access TDS, MSDS, and coverage charts for all primer and emulsion products.

Go to Download Zone

Product Inquiry

Request a quote, sample, or coverage estimation for any primer product.

[email protected]

+966 (11) XXX-XXXX